Software applications¶
First of all, Veronte Link is required to connect a CEX to a computer. Then, it can be configured with CEX PDI Builder.
Veronte Link¶
Veronte Link establishes communication between a computer and any Veronte product by creating a VCP bridge. It allows to use multiple control stations and autopilots to be interconnected, operating simultaneously. Veronte Link also includes a post-flight viewer, to reproduce all recorded data from previous flights and generate plots and reports.
For more information, visit the Veronte Link user manual.
CEX PDI Builder¶
CEX PDI Builder is the main configuration tool to adapt a CEX to be suitable for a specific system, being its main goal to expand the available communication protocols. CEX PDI Builder includes:
Communications: Through general purpose CAN bus, inputs and outputs and PWMs.
Stick control signal management: Compatible with Stick Expander, Futaba, Jeti, FrSky and TBS. It includes custom configuration for other sticks.
Arbitration: CEX is able to send PWM signals using arbitration in the same way Veronte Autopilot 4x does.
Read the CEX PDI Builder user manual for more details.
Note
By default, CEX has not any configuration. In consequence, CEX will be in maintenance mode and Veronte Link will show the Loaded with Error status. Nonetheless, it is possible to load a new configuration with CEX PDI Builder; since the maintenance mode allows to connect a computer and load any configuration, with any connection (USB, RS-232, RS-485 or CAN).